EN
35
LED
Identification
LED Status
Description
A2
POWER/PROC
ON
Power supply ON
OFF
Power supply OFF
A3
GPON LINK
Refer to the next table
A4
AUTH (I)
A5
Not Available
A6
ETHERNET (Left)
ON
With Ethernet connection
OFF
No Ethernet connection
A7
ETHERNET (Right)
Flashing
Ethernet IN/OUT activity
Table 6-9: ONT 769503-MBH states
6.3.2 Final Checks
Check, using the following table, if the ONT has been successfully registered on the network.
LED
LED Status
Device
A2, A3, A4 and A6
ON
ONT 769503-MBH
A5
Flashing
Table 6-10: ONT 769503-MBH LED final checks
6.3.3 Troubleshooting
The table below, according to the LEDs status, identifies a possible cause and describes the procedure to fix the problem.
LED
State
Probable Cause
Solution
POWER (A2)
OFF
ONT not powered
Verify that the DC power TRIDENT con-
nector is correctly connected to the ONT
769503-MBH and the circuit breakers are all
up and running.
ETHERNET (Left)
(A6)
OFF
ETHERNET cable not
connected correctly
Verify that the ETHERNET cable is correctly
connected to the ONT 769503-MBH’s ETH-
ERNET Port and to the WAN Port of the
premises equipment. Use another Ethernet
cable
GPON LINK (A3)
OFF
Anomaly in the optical
fiber signal
Verify that the optical patchcord is correctly
connected to the ONT 769503-MBH’s inter-
nal optical port and to the local ODF. Verify
that the fiber is ok, it is clean, without cuts,
scratchings or bendings.
AUTH (A4)
OFF
GPON LINK (A3)
ON
ONT 769503-MBH de-
activated by the net-
work administrator
Contact the technical support.
AUTH (A4)
OFF
(A5)
Not Avail-
able
Not Available
Not Available
GPON LINK (A3)
Blinking
Authentication Error at
the ONT 769503-MBH
Contact the technical support.
AUTH (A4)
OFF or
Blinking
Table 6-11: ONT 769503-MBH troubleshooting
Содержание 769503
