Televes 769503, Руководство пользователя

Страница: 21 / 40

EN
21
Horizontal position
Open the ONT lower cover;
Place the optical cable in one of the openings, (a) or (b) shown in Figure 4-13;
Pass the optical cable, in a clockwise direction, round the circular guide inside the ONT, wrapping it round as many times as necessary;
Attach the fibre to the optical connector inside the ONT;
Place a 3 mm plastic clip round the support and the optical cable before the point at which the cable exits the box Figure 4-13(c). Tighten
this just enough to ensure the optical fibre will not move;
Close the ON
Figure 4-13: Optical cable installation – Horizontal mount
ETSI rack
Remove the ONT cover;
Mount the equipment on a ETSI 19’’ rack using the 4 supplied screws.
Place the optical patchcord (SC/PC termination) in the rack fiber accomodation structure in order to promote a correct cabling manage-
ment up to the equipment optical interface connector.
Place the electrical CAT5E ethernet cable in the rack electrical cabling accomodation structure in order to promote a correct cabling
management up to the equipment ethernet interface connector.
Place the power cabling (reduntant paths) from the power box up to the TRIDENT power cord connectors.
Figure 4-14: ONT Rack Mount (ONT 769503-MBH)