Televerge TEERAS Скачать руководство пользователя страница 72

Страница: 72 / 74

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

Note: The country code selection is for non-US model only and is not available to all

US model. Per FCC regulation, all WiFi product marketed in US must fixed to US

operation channels only.

Professional installation instruction

1. Installation personal

This product is designed for specific application and needs to be installed by a

qualified personal who has RF and related rule knowledge. The general user shall not

attempt to install or change the setting.

2. Installation location

The product shall be installed at a location where the radiating antenna can be kept

20cm from nearby person in normal operation condition to meet regulatory RF

exposure requirement.

3. External antenna

Use only the antennas which have been approved by the applicant. The non-

approved antenna(s) may produce unwanted spurious or excessive RF

transmitting power which may lead to the violation of FCC limit and is prohibited.

4. Installation procedure

Please refer to user’s manual for the detail.

5. Warning

Please carefully select the installation position and make sure that the final output

power does not exceed the limit set force in relevant rules. The violation of the rule

could lead to serious federal penalty.

Содержание TEERAS











































































Результаты поиска

Содержание TEERAS

Отзывы:

Бренды по названию

Популярные бренды

Televerge TEERAS, Руководство пользователя

Результаты поиска

Содержание TEERAS

Отзывы:

Бренды по названию

Популярные бренды