Teletronics International Inc.
CPE Complete User Manual
Page 7 of 27
With the configuration utility, you will be able to setup the CPE as a CPE, setup the CPE
as an AP, and setup IPs, gateways, subnets, and routes.
Clicking on the side options will take you to a variety of menus which include,
Server Status Page
Provides wireless status
Assign W/LAN IP Addresses
Allows you to assign IP addresses to
Ethernet and Wireless LAN cards
Static and Default Routes
Allows the setup of gateways and routes
Configure Wireless Adapter
Allows the configuration of up to 4 wireless
Adapters
IP Masquerading
Allows NAT to be enabled or disabled
802.1d for AP and Ethernet
Enables or disables bridging
only in AP
mode
Change Admin Password
Allows the admin password to be changed
Upgrade Firmware
Upgrades the current firmware
Restore Factory Defaults
Restores the CPE to factory default settings
•
When adjusting IP addressing or gateway routes, clicking the line of the address you
wish to modify will automatically choose that address and put the values in the
appropriate fields.
