6
Rear Panel:
230V AC:
230V power connector (cable included)
1AT:
1 Amper ’T’ type fuse, removable
POWER:
Supply switch
MGMT:
Management 10/100 Base-T Ethernet Port for configuration
PGM:
Programmer connector just for service purposes.
UDP/IP:
100 Base-T Ethernet port for TS sending in UDP/IP packets.
SDI IN:
Serial Digital Interface: Formerly the SDI interface was used only for linking
professional video equipment within the studio at the transmission of
uncompressed digital video signals. Today, the SDI interface can be found at
the inputs and outputs of more and more equipment of cable television and
other fields. Its great advantage is that one single coaxial cable can be used for
transmitting the picture and sound. The standard BNC connector on the back
panel of the MPEG-4 encoder is used for connecting the SDI signal. Over
time the SDI transmission developed to a fairly wide range of standard family.
The encoder supports the following formats: SD-SDI (SMPTE 259M, 270
Mbit / s), HD-SDI (SMPTE 292M, 1.485 Gbit / s). The transmission of sound
(embedded audio) is provided in the form of additional data, according to
SMPTE 272M (SD-SDI) and SMPTE 299M (HD-SDI).
Additional information: Due to the high bitrate use high-quality, double shielded coaxial cable, and try to minimize the length of
the cable, although originally the standard guarantees hundreds of meters of transmission quality.
230V AC POWER
MGMT PGM UDP/IP
SDI IN
1AT
