3
Mechanical parameters, operation
The height of the encoder is 1 unit (1U) with 19’’ width and is supplied with standard
power cable.
In case of rack-mounted usage, the operator should take care of the proper airflow and
ventilation! Do not cover the case because it could cause overheating!
Hardware structure
Front Panel:
State indicator LEDs LCD
State indicator LEDs:
Power OK
TS proper
Encoder setting, boot procedure
Serious internal problem
LCD:
2 line 40 character alphanumerical display, representing the state of the equipment on 12 pages:
1
st
page:
TS MAC Address:
The MAC address of the UDP/IP marked ETH port.
TS IP:Port:
The IP address of the UDP/IP marked port separated by a colon is the port.
2
nd
page:
Target IP:Port:
The IP address of the destination side (DECODER) and the port on which
the decoder detects and filters.
Gateway IP:
The IP Address of gateway if we use ‘Through gateway’ TS sending
(See below!)
