TELETECH VoicePilot TSA2100 Скачать руководство пользователя страница 3

14 

 

Non EN 81-28 mode: 
1: Press the emergency button until you hear the lift alarm dialling. 
2: When the rescue service answers, check the 2 way communication. 
3: Check that the rescue service is ending the call correct 

(the VoicePilot TSA2100 hangs up)

 
If the VoicePilot TSA2100 indicates a battery failure during the automatic or manual 
test (please notice that this is only possible if you use a PowerSupply TPS10 from 
ABP TeleTech A/S), the battery must be replaced as soon as possible (please refer to 
the PowerSupply TPS10 manual). 
 
If you use a 3rd part power supply you must make sure that this as well as the backup 
battery or other emergency power is in working order. 
 

Programming of lift alarm settings

 

 
Pickup delay: * 6 T # 
(T = 1 - 9 rings, 0 = disabled, Default = 1) 
 
Access code: * 9 <access code> # 
 
Delay before alarm call, Emergency push button in lift car: * * 1 * T # 
(T = 1 - 99 seconds, 0 = disabled, Default = 5) 
 
Delay before technical alarm call, Service/End Of Alarm/Lift in service: * * 2 * T # 
(T = 1 - 99 minutes, 0 = disabled. Default = 0) 
 
Delay before technical alarm call, Filtering/Doors open: * * 3 * T # 
(T = 1 - 99 minutes, 0 = disabled, Default = 0) 
 
Delay before technical alarm call, Technical alarm (free choice): * * 4 * T # 
(T = 1 - 99 seconds,  0 = disabled. Default = 0) 
 
Delay before alarm call, Emergency pushbutton under lift car (PSB): * * 5 * T # 
(T = 1 - 99 seconds, 0 = disabled, Default = 2) 
 
Delay before alarm call, Emergency pushbutton on top of lift car (PSB): * * 6 * T # 
(T = 1 - 99 seconds, 0 = disabled, Default = 2) 
 
Delay for local telephone/motor room handset: * * 7 * T # 
(T = 1 - 99 seconds, 0 = disabled, Default = 0) 

 

Preface

 

 
This guide is intended for the installers of elevator alarms. On the basis of this guide 
the installer will be able to connect, program and test the elevator alarm. 
 
The installer will also be able to instruct the owner of the elevator in how the elevator 
alarm is tested and maintained. 
 
This guide is not a complete instruction in all functions and programming possibili-
ties. If you require this information a Technical manual can be obtained on our home-
page www.abp-teletech.com or by contacting your local distributor.  

Obligations

 

 
In the package you will find a document named Owner of Elevator Document 
(OED). According to EN 81-28 the installer is obliged to fill in this document and 
hand it over to the owner of the elevator. Also the installer must give the owner of 
the elevator instructions in how the elevator alarm is tested and maintained. 

Package contents 

 
Qty: 
1 Lift Alarm VoicePilot TSA2100 
1 Manual 
1 Owner of Elevator Document (OED) 

Содержание VoicePilot TSA2100









Отзывы: