Telestream Vantage Lightspeed G Series, Руководство пользователя

Страница: 38 / 46

Server Installation and Maintenance
Maintaining the Server
38
Lightspeed G-Series Guide
Installing New or Replacement Hard Drives
Follow these steps to replace a failing hard drive or install a new one. Drives may be
removed or replaced with power on. See the Drives topic in the Technical Specifications
chapter for new or replacement drive specifications.
WARNING:
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
WARNING:
This unit has two power supply connections. Both connections must be
removed to completely de-energize the unit.
1.
Remove the front bezel from the chassis.
2. Press the release button on the right front of the drive carrier.
3.
Use the drive carrier handle to pull the carrier out of the chassis.
4. Remove the drive or dummy drive from the carrier by removing the four M3 screws
from the underside of the carrier. Retain the screws.
5. Insert the new drive into the carrier with the PCB side down and the connector
facing the back of the carrier.