PRISM MPX2-25 Installation and Safety Instructions
xi
use the provided power cord for other products.
Ground the product:
This product is grounded through the grounding conductor of the power cord. To avoid electric
shock, the grounding conductor must be connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded. Do not disable the power cord grounding
connection.
Power disconnect:
The power cord disconnects the product from the power source. See instructions for the location. Do
not position the equipment so that it is difficult to operate the power cord; it must remain accessible to the user at all
times to allow for quick disconnection if needed.
Observe all terminal ratings:
To avoid fire or shock hazard, observe all rating and markings on the product. Consult the
product manual for further ratings information before making connections to the product. Do not apply a potential to any
terminal, including the common terminal, that exceeds the maximum rating of that terminal.
Do not operate without covers:
Do not operate this product with covers or panels removed, or with the case open.
Hazardous voltage exposure is possible.
Avoid exposed circuitry:
Do not touch exposed connections and components when power is present.
Do not operate with suspected failures:
If you suspect that there is damage to this product, have it inspected by
qualified service personnel.
Disable the product if it is damaged.
Do not use the product if it is damaged or operates incorrectly. If in doubt about
safety of the product, turn it off and disconnect the power cord. Clearly mark the product to prevent its further operation.
Before use, inspect voltage probes, test leads, and accessories for mechanical damage and replace when damaged.
Do not use probes or test leads if they are damaged, if there is exposed metal, or if a wear indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions: Be aware that condensation may occur if a unit is moved from a cold to a warm
environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry: Remove the input signals before you clean the product.
Provide proper ventilation: Refer to the manual's installation instructions for details on installing the product so it has
proper ventilation.
Slots and openings are provided for ventilation and should never be covered or otherwise obstructed. Do not push
objects into any of the openings.
Provide a safe working environment: Always place the product in a location convenient for viewing the display and
indicators.
Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics professional to avoid stress
injuries.
Use only the Telestream rackmount hardware specified for this product.
Service Safety Summary
The Service safety summary section contains additional information required to safely perform service on the product.
Only qualified personnel should perform service procedures. Read this Service safety summary and the General safety
summary before performing any service procedures.
To avoid electric shock:
Do not touch exposed connections.
Содержание PRISM MPX2-25
Страница 1: ...PRISM MPX2 25 Media Analysis Platform Installation and Safety Instructions 071 3738 00...
Страница 16: ......
