Copyright © 2013
Teleste Corporation
Optimo
Server Installation Guide and Release Notes v2.0.2
5
Optimo
(R) Server S230AE
2. Power on the machine.
3. Log into the system with the username “elemental” and password “elemental”.
4. Type the following command to see the software versions available for installation:
ls ~/elemental_production_*
5. Run the installer and follow the prompts to set up the software, replacing the #### placeholder
characters with the version number shown in the prior step:
sudo ./elemental_production_server_2.0.2.####.run
When the installation completes, you should see the following:
Installation and configuration complete!
Starting elemental_se: [ OK ]
Please open a web browser and point it to: http://<your ip address> to get to
the web interface.
Please contact [email protected] if you are having
difficulties.
Enjoy!
If you do not see successful output after running the configure script, please contact
Optimo
support (
).
For more information on the configuration script, please see
Appendix A – Configuration details
.
NOTE: follow the prompts to set up a static IP or use DHCP. The system ships from
Teleste
Corporation
with DHCP enabled.
At this point, you can determine the IP address of your system by typing:
VGA
Ethernet (eth0)
ILO
