Copyright © 2013
Teleste Corporation
Optimo
Server Installation Guide and Release Notes v2.0.2
3
INTRODUCTION
This guide describes how to turn on the
Optimo
Server hardware and connect to the system for the
first time.
DOCUMENTATION STANDARDS
Note that text in this
font
must be typed exactly as is. Text in angle brackets (‘<’ or ‘>’) indicates
substitution.
For example, to show the contents of a file, you should use the cat command with the filename that you
want to view. This is documented as follows:
cat <filename>
FIRST TIME INSTALLATION
1. Before turning on the system, connect a keyboard, power cable, monitor, and Ethernet cable to the
system as shown in the diagrams below. Note that a USB keyboard will work for all systems.
a. In a 1RU and 2RU systems, the Ethernet cable should be connected to eth0, the left-most LAN
port before powering the system on.
Optimo
(R) Server S200AE
Optimo
(R) Server S220AE
Ethernet (eth0)
VGA
Ethernet (eth0)
VGA
IPMI
IPMI
