Telequipment DM64 Скачать руководство пользователя

Страница: 4 / 63

INTRODUCTION

The OM64 is an all solid-state, dual trace, storage oscilloscope. It uses a bistable CRT to provide

a large, bright display. Stored waveforms may be viewed for up to one hour.

In the non store mode, it performs as a conventional oscilloscope.

The design of this instrument

is subject to continuous

development

and improvement,

conse-

quently this instrument

may incorporate

minor changes in detail from the information

contained

herein, which would, in the main, affect the Components

List and the reader should pay particular

attention to the notes at the beginning of chapter 5.

To minimize the risk of damaging the storage screen, the following precautions

should be

observed.

Because an undeflected

bright

spot on the CRT screen can burn the storage target,

the

BR ILLlANCE control

should

be kept to the minimum required to produce a clear, well-defined

display. Care must be observed in the degree of writing-beam intensity used, particularly when using
slow sweep rates.

When attempting

to store fast-rising or fast-falling portions of waveforms viewed at relatively

slow sweep rates, the high trace intensity

required

(due to the intensity

difference

between the

horizontal and the vertical segments) could cause storage target damage.

Avoid repeated use of the same base line position on the screen.

Do not leave a display on the CRT screen (either writing or stored) when the display is not

needed.

Do not leave STORE switches pushed in when the storage mode is not needed.

To obviate the risk of damage during transit and facilitate packaging, the owner is requested to

remove the po~er supply plug and NOT send the following items unless they are suspect, should this

Instrument be returned to TELEQUIPMENT for servicing.

Manual
Probes
Power Supply Lead
Plug Assemblies

Содержание DM64
































































Результаты поиска

Содержание DM64

Отзывы:

Похожие инструкции для DM64

Бренды по названию

Популярные бренды

Telequipment DM64, Руководство пользователя

Результаты поиска

Содержание DM64

Отзывы:

Похожие инструкции для DM64

Бренды по названию

Популярные бренды