Telemotive Engineered XLTX Transmitter Instruction Manual
May 2011
Page 29 of 40
WARNING
THIS PASSWORD FUNCTION IS NOT TO BE USED AS A SECURITY DEVICE. THE
PURPOSE OF THIS FUNCTION IS TO PREVENT ACCIDENTAL CHANGES TO THE
TRANSMITTER SETTINGS. THE BEST FORM OF SECURITY IS ALWAYS TO LOCK UP THE
TRANSMITTER WHEN NOT IN SERVICE. FAILURE TO FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.
The password default setting is to be disabled during initial programming by the RCP software.
To enable password protection, check the box next to the phase “Activate password.”
WARNING
NOT ENABLING THE PASSWORD FUNCTION ALLOWS THE TRANSMITTER SETTINGS TO
BE MODIFIED BY ANY UNAUTHORIZED USERS. IMPROPER TRANSMITTER SETTINGS
COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.
Backlight Enable
This section allows the user to enable the LCD display backlight (on systems equipped with
optional graphic user interface LCD display) and select the period of time after transmitter activity
that the backlight stays on.
The user has the option to check the “Always On” check boxed for backlight timeout. If this box
is checked, the backlight will remain on continuously while the transmitter is active.
NOTE: The longer the backlight is turned on, the shorter the transmitter battery life will be.
The user can also enable the backlight to turn off or timeout after a period of time - the user can
select the custom field and enter in the time (in seconds) that the backlight should be lit. The
range of values is 1 to 30 seconds.
Update Transmitter Date/Time
This feature allows the user to reset the internal clock on the transmitter to the correct date and
time. The user can select to match the clock on the PC that is connected to the unit or select a
custom date and time.
