Telemotive Engineered XLTX Transmitter Instruction Manual
May 2011
Page 28 of 40
WARNING
THE ACCESS CODES IN THE RECEIVER ARE UNIQUE AND FACTORY PRESET. DO NOT
CHANGE THESE ACCESS CODES UNLESS YOU ARE REPLACING AN EXISTING
RECEIVER AND ITS ACCESS CODE. CHANGING THIS CODE COULD MAKE IT COMMON
WITH ANOTHER RECEIVER ACCESS CODE, WHICH COULD MOVE OTHER EQUIPMENT.
NO TWO SYSTEMS IN ANY LOCATION SHOULD EVER HAVE THE SAME ACCESS CODES
INDEPENDENT OF FREQUENCY. FAILURE TO FOLLOW THIS WARNING COULD RESULT
IN SERIOUS INJURY OR DEATH, AND DAMAGE TO EQUIPMENT.
RF Channel
The RF channel is user-selectable through the pull-down menu. This function is used to prevent
interference with other radio devices. The user-selectable channels for 400MHz, 900MHz and
2.4GHz systems are 1 through 32. See Sections 6.2 and 6.3 for channel frequency details.
Inactivity Timeout
The transmitter can be set to turn off after a period of time when no controls are activated. To
restart the transmitter, the OFF-ON-START switch must be cycled through the start position. The
factory default setting for the inactivity timeout is 15 minutes.
RF Power
The RF transmitting power of the unit is user-selectable through the pull-down menu. This
function is used to reduce the operating range of the transmitter from the equipment being
operated. The user-selectable options for RF power are Full, Half, Quarter and Minimum.
Activate Password
The password is used to restrict access to the configuration menu on the XLTX. Having an active
password prevents accidental changes to the transmitter.
Please familiarize yourself with this section before programming your password.
If you choose to enable the password function, you can create a new password by selecting a
four digit numerical password using numbers from 0 to 9. Be sure to write this password down in
a safe place for future reference.
WARNING
ALWAYS REMEMBER TO STORE THE PASSWORD IN A SECURE LOCATION FOR ACCESS
IF THE PASSWORD IS LOST OR FORGOTTEN. ONCE THE TRANSMITTER IS
PROGRAMMED WITH A PASSWORD, THERE IS NO WAY TO DEFEAT THE PASSWORD
WITHOUT USING THE RCP SOFTWARE TO EITHER READ THE PASSWORD OR
REPROGRAM A NEW PASSWORD.
