INSTALLATION OF DRIVER
1. Make sure the camera is not connected to your computer. Load the
software CD to your PC
2. Click <Install Camera Driver> and follow the step-by-step
instructions to complete installation. After successful installation
of driver, restart your computer. A “Dual Mode Camera” folder will
appear on your desktop.
TAKING PHOTOGRAPHS
Install one AAA Alkaline Battery.
1. To turn on the camera, press the mode button on the back. The
LCD data screen will appear.
2. Center your subject in the viewfinder
3. Hold the camera steady, and press the shutter button to take
photos
4. When you hear the camera beep once, this indicates you have
taken a photo
5. When the maximum number of photos has been taken, the camera
will beep twice indicating no additional images can be shot.
Notes
1. When taking photos, the louder sound indicates a successful shot.
A faint beep will indicate a failed shot.
2. The digital camera is capable of storing over 99* images, however,
the LCD can only display up to the #99.
* In QVGA Low Resolution Mode
TURNING OFF CAMERA
1. Press MODE button until the data LCD displays “off.
2. Press the “Shutter” button within 5 seconds to turn off the camera
swiftly.
3
