Telematrix 3002MWD5, Инструкция по установке и эксплуатации

Страница: 9 / 20

WALL MOUNTING
Wall Mounting Your 3002MWD5
The 3002MWD5 was designed to be conveniently wall mounted.
There is no additional hardware required. Follow these easy
steps:
1. The handset retaining clip must be engaged to secure the
handset when hanging up. To engage the clip, unsnap the
clip, rotate the clip 180º and then snap the clip into place.
(figure 7)
2. Plug one end of a short line cord (not included) into the line
jack on the back of the Marquis base unit. Plug the remaining
end of the short line cord into the wall jack. Next, guide the
phone onto the studs of the wall jack. Pull down firmly until
you feel it snap into place. The unit is now wall mounted.
(figure 8)
Figure 8
Figure 7
7
1. UNSNAP
2. ROTATE 180 .
3. SNAP INTO PLACE.
2 4 V 4 8 V O F F
L1
L 2
LABEL-FCC
LABEL-S/NO.
LABEL-IC
LABEL-ETL
W E D G E
2 . S N A P I N T O P L A C E .
T A B S .
1.PRESS THE RELEASE
MOUNTING