Telematrix 3002MWD5, Инструкция по установке и эксплуатации

Страница: 6 / 20

Figure 5
SWITCH SETTINGS
There are installer selectable switches located on the bottom base underneath a protective plastic overlay. These switches are hid-
den behind a plastic cover for security. To locate, remove the plastic covers using a sharp pointer or paper clip as shown.
4
Line Voltage Selectors
The 3002MWD5 is designed to operate behind PBX telephone systems rated
between 24 volts and 48 volts. There are line voltage selector switches that
must be set according to the PBX system rating that the phone will be in-
stalled. There are two (2) switches, the first for Line 1 and the other for Line
2. Each switch has three (3) setting options. They are: “24V/48V/OFF”. Set
the switches by simply sliding to the appropriate setting. The ”OFF” setting is
used to turn off the line if a line appearance is not wired to the telephone.
(figure 6)