Programmable Sweep Instruction Manual
CONFIGURATION
telemark.com
33 of 58
Rev 1.0.0
5.2.4 Angle Offset
Figure 5-4, Angle Offset Setup
Beam in pocket is used for some non-Telemark e-beam sources that require a +/-45
degree rotation of the output lateral or longitudinal signals to the source.
1.
Angle Offset Off
–
normal operation (Telemark E-beam Sources)
2.
+45 degree Angle Offset
–
Output rotated clock wise 45 degrees.
3.
-45 degree Angle Offset
–
Output rotated counter clock wise 45 degrees.
5.2.5 Lat/Long Flip
The + and - direction of latitude and longitude output can be changed by pressing the
Lat Flip On/Off
and/or
Long Flip On/Off
button. This is useful to get the beam
movement to match the standard Lat/Long directions.
Figure 5-5, Lat/Long Flip Setup
5.2.6 Factory Service
Factory Service
is for factory use only.
