Sinus 154 media / englisch / A31008-E505-A108-1-D1 / Sinus_154_media_QIG.fm / 09.08.2004
English
Releasing media files
Connecting
Sinus 154 media can only access multimedia files that are stored in directories that have been released as
media files with the media server software:
In the
Freigegebene Ordner
register, click on
Hinzufügen...
to open the
Ordner suchen
dialogue.
Select the required drive or directory and confirm your choice with
OK
.
The
Ordner suchen
dialogue closes. The selected directory is released as the media file and is displayed
in the navigation area.
Repeat this procedure until you have added all the directories you require.
Finally, in the
Aktualisieren
register, click on
Jetzt Aktualisieren
to save the change to the released media
file.
Preparing the remote control
Open the battery compartment in the remote control:
– First, press the spring mechanism on the battery compartment lid
and keep it pressed down.
– Then carefully lift the battery compartment lid away from the
remote control.
Insert the two supplied batteries into the battery compartment.
Check that the polarity is correct. The schematic representation on
the bottom of the battery compartment shows the direction in which
they should be inserted.
Close the battery compartment.
– Push the retaining tab on the battery compartment lid into the
opening in the battery compartment provided for the purpose.
– Lower the battery compartment lid until the spring mechanism
clicks into place.
Setting up Sinus 154 media
Position the supplied stand on a level surface in the desired loca-
tion.
Insert Sinus 154 media upright (device switches uppermost) into
the stand.
Make sure that you connect the two guide pins on the stand with
the openings provided in the housing.
Connecting the television to Sinus 154 media
Risk of electric shock
Disconnect the television from the mains power supply before connecting the AV adapter cable
with the SCART connector.
Connect the cinch plugs on the AV adapter cable to the
same coloured cinch sockets on Sinus 154 media.
Plug the SCART plug on the AV adapter cable into a free
SCART connector on your television.
Then connect the round plug on the mains adapter to
the
SNG-6 ACC
supply terminal on Sinus 154 media.
Connect the mains adapter and the television to your
power supply.
1.
1.
2.
2.
