0-Date
D a y
-
M o n t h
-
Y e a r
S e l e c t
O r d e r
Pressing any of the numeric (0-9) will toggle the date format between
Day-Month-Year and Month-Day-Year.
When the desired state is displayed it should be selected by pressing the
return key. The following screen will be displayed:
D A T E
2 1 - 0 8 - 9 5
S E T
The cursor (underline) indicates which number is selected and either a
different number can be input using the numeric keys (0 to 9 in Figure 2)
or the displayed value can be selected by pressing the return key. In
each case the cursor will move to the next number on the display, six in
total, and each pair of numbers represents each field of the date format
selected previously.
After the sixth number has been selected the display will switch to the
following time selection screen:
T I M E
1 1 - 0 8 - 3 5
S E T
Similarly the cursor (underline) indicates which number is selected
and either a different number can be input using the numeric keys (0
to 9 in Figure 3) or the displayed value can be selected by pressing
the return key. In each case the cursor will move to the next number
on the display, six in total, and each pair of numbers represents each
field of the time format i.e. hours-minutes-seconds.
Note:
The clock in the Tempest does not store leap year data and,
therefore, will need to be reset every 4 years e.g. the clock will need
resetting on the 1
st
January 2000, 1
st
January 2004 ets.
