4.
QUICK START
This reference section will enable the user to operate the
TEMPEST
50
quickly. However, it is advisable to consult the relevant sections
to familiarise yourself with the layout of the
TEMPEST 50
(Section
3 - Tempest Grand Tour). For a more detailed explanation of the
set up conditions see Section 5 and for key operations see Section 6.
4.1
Before Starting
Check that the contents supplied (Section 2) are in good condition.
Always use the
TEMPEST 50
in the upright position.
4.2
Switching ‘On’
Press the on and off keys together.
4.3
Operation Mode
When switched on the display will read:
- - - - - - - - - - - - - - - -
* * *
T E L E G A N
* * *
* *
T E M P E S T
5 0
* *
- - - - - - - - - - - - - - - -
unless specially configured for you
The display will then countdown a stabilising or calibrating
sequence from 30 to 0 as the unit stabilises before returning to the
initial display as illustrated above.
Listen to check that the pump is running.
Check the current battery charge level by pressing key ‘O’
and reading the percentage battery charge remaining
(Battery (%)):
? If the level is below 40% then it is advisable to change the
battery
? If the level is below 10% then the low battery warning will
be displayed and the battery must be changed.
? The
TEMPEST 50
can be used normally with the battery
charger connected.
