[Type some text]
43
Non binding document, subject to modification in the
event of misprint(s) – MKG0308
Digi
frame
Digital photo frame
You need to make sure that your computer's configuration is compatible with the
DIGIFRAME. In fact, software incompatibilities or hardware conflicts may occur at
the time of connection. TELEFUNKEN cannot be responsible under any
circumstances for an unsuitable configuration.
A USB 2.0 port offers you the best transfer speed, but the DIGIFRAME will
also work with a USB 1.1 port. In this case, the following message may
appear when you connect the DIGIFRAME to the PC:
"
This device can operate more quickly.
This peripheral may operate at a
higher speed if you connect it to a high speed USB port
"
Ignore it.
Start the computer, leaving the DIGIFRAME switched off.
Connect the small connector on the USB cable to the DIGIFRAME. Check
that the connector is plugged in properly.
Connect the other end of the USB cable to a USB port on your computer.
Switch on the DIGIFRAME.
Now refer to the
"TELEFUNKEN DIGITRANSFER"
software installation guide.