GB
INSTALLATION MAIN MENU
Exit
Manual programming
Auto installation
Programme organisation
Personal settings
SEARCHING
AUTO INSTALLATION
03 STATIONS FOUND
Searching for TV stations.
Please wait. To cancel press EXIT.
Automatic installation
7
Automatic installation
The Automatic installation function is useful if you have to go through the installation procedure again, such as
when moving house. This function deletes all previously memorised programmes. To install a new channel, you
should use the Manual programming function.
Before running
AUTO INSTALLATION
, check the
PERSONAL SETTINGS
menu to ensure that the country
displayed is correct.
Your television will only search for channels corresponding to the selected country, so see the Manual
programming chapter to install any channels not found. For cable networks, if you have not found certain
channels, select
Other
instead of a country name in the
PERSONAL SETTINGS
menu, then run automatic
installation again.
1. Press and hold the
key on the remote
control to display the
INSTALLATION MAIN
MENU
(The
SUMMARY
appears
first,
followed by the
INSTALLATION MAIN
MENU
).
2. Select the
Auto installation
line.
3. Validate using
.
A message will inform you that Automatic
installation has begun.
Wait for a few minutes.
A
new
message
will
inform
you
when
Automatic installation is completed.
If you wish to check or reorganize your channel
display, press the
key and see the
Programme organisation chapter.
If you do not wish to reorganize your
programmes, you can exit this menu by
pressing
, then watch the programme of
your choice. Choose the desired programme
using the number keys (1, 2, 3, ...) and the
/
keys.
