English
- 30 -
Getting Started
Remote Control
Teletext
Press
TXT
button to enter. Press again to activate mix
mode. Press once more to exit. Follow the instructions
displayed on digital teletext screen.
Digital Teletext (for UK only)
Press
TXT
button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the
OK
button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the
TXT
button is pressed again, the TV returns
to television broadcast.
1.
Standby / On
2.
Play (in media browser mode)
3.
No function
4.
Mono-Stereo Dual I-II / Current language
5.
Fast rewind (in media browser mode)
6.
Colored buttons
7.
Numeric buttons
8.
Channel list
9.
Navigational buttons
10.
Ok / Confirm
11.
Menu on / off
12.
Return / back
13.
Internet
14.
Media browser
15.
Electronic programme guide
16.
Teletext - Mix
17.
Volume up / down
18.
Mute
19.
Programme up / down
20.
Image size
21.
Info / Reveal (in TXT mode)
22.
My button 1 / YouTube (*)
23.
My button 2: Switches between digital/cable/
satellite broadcasts (**)
24.
Exit
25.
Quick menu
26.
Previous programme / Now ( in EPG mode)
27.
Fast forward (in media browser mode)
28.
Subtitle on-off / Subtitle (in media browser
mode)
29.
Stop (in media browser mode)
30.
Pause (in media browser mode)
31.
AV / Source
4
7
8
9
P+
P-
V+
V-
1
.,/@
2
3
5
6
0
OK
Q.MENU
EXIT
BACK
LANG.
SOURCE
2
/
1
/
Using My button 1 (*)
This button’s main function is to run Youtube link. However, if
you want to change this function, you can press MY BUTTON
1 for five seconds when on a desired source, channel or
link, until the “MY BUTTON IS SET” message is displayed
on the screen. This confirms that the selected MY BUTTON
is now associated with the selected function. Note that if you
perform first time installation, MY BUTTON 1 will return to
its default function.
Using My Button 2 (**)
This button’s main function is to switch between DVB-T,
DVB-C and DVB-S broadcasts. However, if you press
MY
BUTTON 2
for five seconds, you can set a function to it
as described in My Button 1.
Note that if you perform first time installation, MY BUTTON
2 will return to its default function.
