Teleflex TFX128, Руководство по эксплуатации

Страница: 6 / 26

USING THE 128 SERIES
WHAT YOU SEE ON-SCREEN
Note: Settings are not retained when made in S
IMULATOR
M
ODE
.
Changes are retained in feature memory only when made when
the unit is in the normal operating mode."
WHAT YOU SEE ON-SCREEN
Your 128 uses a 128 x 64 matrix FSTN LCD display. This display provides
outstanding viewability in all light conditions over a wide range of
temperatures.
At initial power-up, the 128 uses
settings that were set at the factory.
After initial use, the
128 will
remember many of the settings you
enter.
There are several elements on-screen
that are common to all modes of
operation.
S
PEED
/T
EMPERATURE
. The initial screen
layout takes one of two basic forms
depending on whether the optional
Speed/Temp accessory is installed.
Figure A shows the default view
when the Speed/Temp accessory is
installed. Figure B shows the default
view when the Speed/Temp accessory is not installed.
D
EPTH
. The digital depth number shows the water depth directly beneath
the transducer location.
4
Figure A
Water Depth
Depth Range
Water Temperature
Speed