Eye
III+
VXB
I
nstallation Guide
Page 38
Menu Operation
INFORMATION
: Show the transmitter information
RESTORE FACTORY SETTING
: Restore the factory setting
RESTART SYSTEM
: Restarting the system
BACK
: Back to previous menu
Event Setup Menu
The event setup menu contains the following items
ALARM EVENT
: Change alarm event associated actions
MOTION EVENT
: Change motion event associated actions
VIDEO LOSS EVENT
: Change video loss event associated actions
DISK FULL EVENT
: Change disk full event associated actions
SYSTEM FAILURE EVENT
: Change system failure event associated actions
MOTION CAMERA SETUP
: Enable/Disable motion detection for a particular camera
EVENT SWITCH SETUP
: Change relay switch type for event triggered actions
DIAL BACK SETUP
: Change dial back action settings
EMAIL SETUP
: Change Email action settings
BACK
: Back to previous menu
There are totally five types of event action – Recording, Switch, Dial back, Email and Buzzer (in
short form R, S, D, E and B). User can enable these actions as their requirement.
Recording - when an event occurs, the system will start to record video into hard disk
Switch - after activating the switch control, the system will turn on the switch for event
Dial back - the system will take “dial back” action if the specified event occurs
- it is similar to “dial back” option, but the system will send an email
Buzzer - the system will make beep sound for 10 second
[ EVENT SETUP]
ALARM EVENT
. . .
MOTION EVENT
. . .
VIDEO LOSS EVENT
. . .
DISK FULL EVENT
. . .
SYSTEM FAILURE EVENT
. . .
MOTION CAMERA SETUP
. . .
EVENT SWITCH SETUP
. . .
DIAL BACK SETUP
. . .
EMAIL SETUP
. . .
BACK
