MX User Guide
PAGE 12
There is an alternate hole for the
power cable, Ethernet cable and alarm
cable. When this hole is used, the
upper hole has to be sealed with the
plastic cork.
These 4 plastic corks should never be
removed when waterproof is a critical
requirement.
Drill a
ф25mm hole on the ceiling for
video and power connector cable to
pass through.
Take off the dome cover from the
camera. Use specified holes inside the
camera base for installation.
With reference to the following figure, connect the power cable with a 12V DC
supply, Ethernet cable through the LAN adapter and alarm cable to the
camera.
Power cable (DC12V IN)
Ethernet cable
Alarm cable
