MX User Guide
PAGE 29
4.2.
Change the IP address
Step 1:
Before running the IP Setup Utility, turn on the IP camera and make
sure the connection is correct.
Step 2:
Select the
“Run TeleEye IP setup utility” from the start menu.
Step 3:
By comparing the serial number, select the corresponding row from
the list table on the left window. If the serial number cannot be found, click the
[Refresh]
button to try to find it again.
Step 4:
There are two methods to assign the IP address for the camera:
Method 1:
For automatically assigning the IP address, select the
“Obtain
an IP address automatically
” to assign the IP address by the DHCP server.
Using this method, user only chooses which port they want to use.
