TeleEye JN6300-S, Руководство пользователя

Страница: 73 / 110

Alarm Management DVR User Manual
67
②
Select the camera, enable the line crossing detection and set the duration.
③
Select the alert surface and direction. You can add 4 alert surfaces at most.
Direction : A<->B, A->B and A<-B optional. It is the crossing direction of the intruder who
crosses over the alert line.
A<->B : the alarm triggers when the intruder crosses over the alert line from B to A or from A
to B.
A->B : the alarm triggers when the intruder crosses over the alert line from A to B.
A<-B : the alarm triggers when the intruder crosses over the alert line from B to A.
④
Draw the alert surface. Refer to the interface as shown above. Check “Draw Alert Surface”
and then drag the mouse in the image to draw an alert line. Uncheck the “Draw Alert Surface”
if you finish the drawing. Click “Clear” button to delete the alert line.
⑤
Click “Apply” to save the settings.
⑥
Click “Processing Mode” to go to the alarm handling configuration interface of line
crossing detection.
Line Crossing Alarm Handling Configuration :
①
Click Start Settings Alarm Intelligence Alarm Line Crossing to go to the following
interface.
②
Enable or disable “Snap”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”.
The alarm handling setting of line crossing alarm is similar to that of the sensor alarm (see 9.1
Sensor Alarm for details).
③
Click “Apply” to save the settings. You can click “Crossing Config” to go to the line
crossing configuration interface.
9.3.4 Intrusion Detection
Intrusion Configuration :
The relevant alarms will be triggered if someone or something intrudes into the warning areas
or moves in the warning areas drew by the users.
①
Click Start Settings Camera Intelligent Detection Intrusion Detection to go to the
following interface.
②
Select the camera, enable the intrusion detection and set the duration.