TeleEye JN6300-S, Руководство пользователя

Страница: 38 / 110

Live Preview Introduction DVR User Manual
32
Select the camera and then set the brightness, contrast, saturation and hue of the camera. Click
“Advanced” button or in the camera list on the right side of the interface to pop up
“Image Adjust” interface and then set the relevant setting items. Please refer to 5.3.5 Image
Adjustment for detailed introductions of these items.
You can click “Default” button to restore the image settings to the default factory settings.
5.3.3 Mask Settings
Some areas of the image can be masked for privacy. Up to four mask areas can be set for each
camera. Click Start
Settings Camera Image Mask Settings to go to the interface as
shown below. Select the camera and enable the mask. Click “Draw” button and then drag the
mouse on the image area to set the mask area; click “Delete” button to delete the mask areas;
click “Apply” to save the settings.