Tele
Eye
III+
VX
I
nstallation Guide
Page 29
Installation of
Tele
Eye III+
VX
for Remote Monitoring
Tele
Eye
III+
VX
ADSL
Modem
Data
Tele
Eye
Proxy Server
Data
To WAN
(Dynamic IP)
Broadband dial-up to Internet
Data
Transmitter installation procedures:
1.
Install ADSL modem as shown in the connection topology diagram. Connect
Tele
Eye
III+
VX
to network switch, and following the steps in setting up
Tele
Eye
III+
VX
for
Broadband Internet connection with dynamic IP using Internet router. Notice that the
gateway of
Tele
Eye
III+
VX
should remain blank in this case.
2.
Press
[Enter]
button to pop up the main menu, and enter the sub-menu
[TRANSMIITER
SETUP] -> [NETWORK SETUP]
.
3.
Select
[PROXY SERVER]
item and then press enter to edit the proxy sever IP address.
4.
You need to set edit each items of the
[PROXY SERVER SETUP]
menu. Select
[ENABLE]
item and user left/right arrow button to toggle select
[YES]
, enter the IP
address (eg. 192.168.0.2 as in the connection topology), and set the port number (default
value is 19001).
[ NETWORK SETUP ]
TRANSMITTER IP
. . .
SURELINK
. . .
PROXY SERVER
. . .
GATEWAY IP 192.168.0.1
BUILT-IN WEB SERVER ENABLED
BACK
[ PROXY SERVER SETUP ]
ENABLE
NO
IP
0.0.0.0
PORT 0
BACK
