8. Channel Select Key
Used to switch the current selected channel between CH1 and CH2.
9.
Function Keys
Mod ----Modulation
Used to enable the modulation screen and allow for modulation selection. The
selection is AM, DSB-AM, FM, PM, ASK, FSK and PWM modulated signals.
•
It supports “Internal” and “External” modulation sources.
•
The corresponding backlight will turn on when this function is selected.
Sweep ----Sweep
Used to generate sweeping frequency signals of Sine, Square, Ramp and Arbitrary.
•
It supports “Linear” and “Log” sweep profiles.
•
It supports “Internal”, “External” and “Manual” trigger sources.
•
The corresponding backlight will turn on when this function is selected.
Burst ----Burst
Used to generate burst signals of Sine, Square, Ramp, Noise and Arbitrary.
•
It supports “NCycle”, “Gated” and “Infinite” burst modes.
•
Noise can only be used to generate gated burst.
•
It supports “Internal”, “External” and “Manual” trigger sources.
•
The corresponding backlight will turn on when this function is selected.
Parameter ----Parameter Setting
Used to switch directly to the parameter setting interface.
•
The corresponding backlight will turn on when this function is selected.
Utility ----Utility Functions and System Settings
Used to set system parameters and check version information.
•
Press this key and then press the help key to obtain built-in help information
about the product.
•
The corresponding backlight will turn on when this function is selected.
6 Quick Start
