3-1
EAR99 Technology Subject to Restrictions Contained on the Cover Page
SyriXus Series Pumps Installation and Operation Guide
Section 3 Basic Programming and Operation
3.1 Introduction
This section will familiarize you with the SyriXus series pump con-
troller and describe operating the pump under each of the various
Modes: Constant flow, Constant Pressure, Dispense, and Refill.
Pump setup and operation is regulated by the SyriXus series con-
troller. Operating parameters are entered via the keypad on the front
panel of the controller. Operating selections are displayed as menu
items on the controller screen or are associated with a dedicated key
on the controller keypad. Operating modes such as CONST FLOW,
CONST PRESS, DISP, and REFILL all have dedicated keys.
WARNING
UL (Underwriter Laboratories) has certified the SyriXus series
Controller and Pumps on the basis that explosive chemicals or
chemicals that could become explosive under pressure are NOT
used. The instruments are not explosion proof. Use extreme
caution when pumping hazardous fluids.
3.2 General
Controller
Information
The following information is intended to familiarize you with the con-
troller operation. Once you have become familiar with the keypad and
the main menu, you will find it easy to direct the pumping operations
required for your applications.
If you make an incorrect entry, press
CLEAR
ENTRY
to delete your last
keystroke. If you have entered a Programming Mode but do not wish
to make any changes, press
ENTER
to keep the current setting, or press
softkey D to return to the previous screen.
3.2.1 Controller Models
The SyriXus series controller and the standard D series controller are
very similar and can be used interchangeably for many models. When
the pump models and controller model are mixed, the display on the
controller identifying some of the pump models will not show the
pump model as expected.
NOTE
Neither the SyriXus series controller, nor the D series controller, can
be used with the HL pump series.
When the SyriXus controller is connected to a D series pump, the
model numbers are displayed as shown in Table 3-1 "SyriXus Series