Teledyne PEM-9004 Скачать руководство пользователя страница 66

Страница: 66 / 79

Operation PEM-9004

Teledyne Analytical Instruments

•

Press OK to accept the character and move to the next
position.

•

When the directory name is correctly entered, press ENTER to
create and save the directory or CLEAR to quit without
creating the directory.

To erase and existing file or directory:

•

Press F3 from the Memory menu.

•

Use the arrow keys to move to the directory or file.

•

Press OK to select the directory or file.

•

Press ENTER to erase the directory or file or press CLEAR to
abort the action.

4.9 USB-Interface

A USB connection port is provided for special service and data

communication via PC, laptop, notebook, etc. See Figure 3-1.

4.10 Charge Control

The battery is charged automatically when the analyzer is switched

on and off after the battery charger has been connected. The battery can
be recharged as well with the analyzer on. The charge control has both
an active phase and a passive phase.

During active recharging, parameters related to the battery and the

recharging process are displayed on the charge control screen.

Содержание PEM-9004
















































































Результаты поиска

Содержание PEM-9004

Отзывы:

Teledyne PEM-9004, Руководство по эксплуатации, Страница: 66 / 79

Результаты поиска

Содержание PEM-9004

Отзывы: