Teledyne PEM-9004 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 79

Teledyne PEM-9004 Скачать руководство пользователя страница 32

Operation PEM-9004

Teledyne Analytical Instruments

20

•

Press the CLEAR button to close it.

You can switch the backlight on/off using the backlight button) but

the other buttons have no function in this initial menu.

4.3 Main menu

The Main menu screen appears automatically after the initial

startup screen. The Main menu includes a status line and a list of
available programs associated with the 3 function buttons.

4.3.1 Status Line

The status line appears at the top of most screens and continuously

updates and displays the status of certain information such as remaining
battery power, HOLD-function, sensor-alerts, operation of the pump,
chosen fuel, time, etc. It is context sensitive and depends on the
presently displayed screen.

4.3.2 Available Programs

Below the status line is a list of available programs accessible from

the Main menu. Each program is launched by the appropriate button
indicated to the right of the program name. In most cases additional
menus and additional screens will be available from within the selected
program.

«
...
30
31
32
33
34
...
»

Содержание PEM-9004
















































































Отзывы:

Нет отзывов