Teledyne HPAC-2005, Руководство по эксплуатации

Страница: 151 / 156

3 RU SSPA Chassis Operations Manual 205356 REV T 151
The third screen is the “Settings” tab, shown in
Figure C-4
. It shows the user all availa-
ble settings on the SSPA. All user-adjustable settings are allowed to be modified to suit
the specific needs of the customer. However, it should be noted that the SSPA is con-
figured for the customer at the factory. If modification of any settings is necessary
please refer to
Section 2.2
.
The fourth screen is the “IP Setup” screen, shown in
Figure C-5
. It shows the user all
of the TCP/IP settings on the SSPA.
When the IP Address is modified, the SSPA must be reset for it to use the new IP Ad-
dress. Until the SSPA is reset, it will use the old IP Address. The Local Port is the port
that the SSPA listens to for UDP requests. The SSPA also answers requests using the
same port. If the Local Port is changed, the SSPA must be reset.
The Gateway Address and Subnet Mask are standard settings for TCP/IP communica-
tions. If either of these settings is changed, the SSPA must be reset for the new set-
tings to take effect.
Figure C-4: SSPA Settings Window
Figure C-5: IP Setup Window