Teledyne HPAC-2005, Руководство по эксплуатации

Страница: 110 / 156

110 205356 REV T 3 RU SSPA Chassis Operations Manual
Table 7-7: System Setting Details
Data
Address
Length
(bytes)
Description Limits and valid values
0 1
Device Type
(read only)
0 = Reserved;
1 = RM SSPA;
2 = CO SSPA;
3 = RCP2/FPRC; 4 = RCP2-1000-CO;
5 = RCP2-1000-RM; 6 = RCP2-1000-RCP;
7 = VSAT BUC=7 (Version 4.00*)
1 1
System Operational Mode
Designator
0 = Standalone Mode; 1 = 1:1 Redundant Mode;
2 = 1:2 Redundant Mode; 3 = 1:1 Phase Combined
(v. 4.70); 4 = 1:2 Phase Combined (v. 4.98);
5 = Maintenance Switch (v. 6.00*)
2 1 System Switch Mode 0 = Auto; 1 = Manual; 2 = Switch Lock
3 1 Control Mode 0 = Local; 1 = Remote
4 1 Fan Speed 0 = Low; 1 = High; 2 = Auto
5 1 Mute 0 = Mute OFF; 1 = Mute ON
6 1 Serial Protocol Select 0 = Normal; 1 = Terminal
7 1 Baud Rate 0 = 9600; 1 = 2400; 2 = 4800; 3 = 19200; 4 = 38400
8 1 Network Address Valid Values: 0 - 255
9 1 Serial Interface
0 = RS232; 1 = RS485; 2 = IPNet (v. 2.50*);
3 = SNMP (v. 4.00*)
10 1
Auxiliary Fault
Handling
0 = Disable Fault Checking; 1 = Major Fault;
2 = Minor Fault; 3 = Major Fault + SSPA Mute
11 1 Auxiliary Fault Logic 0 = Fault on Logic High; 1 = Fault on Logic Low
12 1
RF Switch Fault
Handling
0 = Disable Fault Checking; 1 = Major Fault;
2 = Minor Fault; 3 = Mute on Switch
13 1 Fault Latch 0 = Disable; 1 = Enable
14 1
BUC Fault
Handling
0 = Disable Fault Checking; 1 = Major Fault;
2 = Minor Fault; 3 = Major Fault + SSPA Mute
15 1 BUC Fault Logic 0 = Fault on Logic High; 1 = Fault on Logic Low
16 1 User Password Valid Values: 0 - 255
17 1 Standby Select 0 = Standby; 1 = Online
18 1 Buzzer 0 = Disable; 1 = Enable
19 1
Menu Password
Protection
0 = Disable; 1 = Enable
20 1 RF Units 0 = dBm; 1 = Watts (v. 3.40*)
* Version numbers listed indicate the version in which the listed feature was introduced.
(Continued)
22 1 HPA Status 0 = HPA1; 1 = HPA2; 2 = HPA3 (v. 3.10*; 1:2 mode only)
21 1 Standby Mode 0 = Hot Standby; 1 = Cold Standby
23 1 Priority Select (1:2 mode) 0 = Pol1; 1 = Pol2 (v. 3.10*)
24 1 Fwd. RF Flt Handling
0 = Disable; 1 = Low RF Major Fault; 2 = Low RF Minor Fault;
3 = ALC; 4 = High RF Major Fault (v. 6.14*); 5 = High RF Minor
Fault (v. 6.14*); 6 = High RF Fault + Mute (v. 6.14*)
25 1 Hi Refl. RF Flt Handling 0 = Disable; 1 = Major Fault; 2 = Minor Fault
26 1 SSPA Attenuation Valid values: 0 - 200; 0.1 dBm per 1 value
27 1 Low Fwd RF Threshold Valid values: 0 - 80; 1 dBm per 1 value
28 1 High Refl. RF Threshold Valid values: 0 - 80; 1 dBm per 1 value