Teledyne HDO8000A, Руководство по началу работы

Страница: 40 / 54

BASICS
36
Decode
The Decode shortcut button is activated when serial trigger and decode software options are installed. Press it to open the serial decode dialogs.
Decoders apply software algorithms to extract encoded information from physical layer waveforms measured on your oscilloscope. Waveforms are
annotated to provide fast, intuitive understanding of the relationship between protocol and signal. Serial triggers fire upon finding complex, user-defined
patterns and events in the data stream. Measure/graph and eye diagram options allow you to apply and plot special measurements designed for serial
data debugging.
Select inputs and protocol. Make
required settings on the subdialogs.
View decoding on the colored
waveform overlays.
Touch header cells (with arrows) to
filter the results shown on the table.
Touch data cells to zoom that single
index of data. The zoomed index is
highlighted.
When multiples decoders are running,
a summary table is shown. Touch
the Index cell to drop-in the detailed
decoding. Touch any cell
other than
Index and Protocol to zoom.
When there is more data than can fit
in a cell, touch the white triangle to
pop-up the full decoding.
Customize the result table or search
for events in the decoded waveform.
A
B
C
D
A
B
C
D
E
F
E
F
G
G