manualshive.com logo in svg

Teledyne HDO8000A, Руководство по началу работы

Поделиться
Скачать
Teledyne HDO8000A Скачать руководство пользователя страница 25

USER INTERFACE

21

MAUI with OneTouch

 

Touch, drag, swipe, pinch, and flick can be used to create and change setups with one touch. Just as you change the display by using the setup dialogs, 

you can change the setups by moving different display objects. Use the setup dialogs to refine OneTouch gestures to precise values.
As you drag & drop, valid targets are outlined with a white box. When you’re moving over invalid targets, you’ll see the “Null” symbol ( Ø ) under your finger 

tip or cursor. 

Turn On

To turn on a new channel, math, memory, or zoom trace, drag any 

descriptor box of the same type to the Add New (“+”) box. The next trace 

in the series will be added to the display at the default settings. It is now 

the active trace.

If there is no descriptor box of the desired type on the screen to drag, 

touch the Add New box and choose the trace type from the pop-up menu.
To turn on the Measure table when it is closed, touch the Add New box 

and choose Measurement. 

Содержание HDO8000A























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды