Teledyne HASTINGS 4/6 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 10

Teledyne HASTINGS 4/6 Скачать руководство пользователя страница 5

148-0598 Rev. A

Page 5

May 1998

with the AVC module and either a DV-4
or DV-6 series gauge tube, and to set the
desired vacuum measuring units to either
Torr or mbar.

3.1 WIRING

3.1.1

Connect the 2 wire ac line cord

to the 2 position connector on the back
of the MODEL 4/6.

3.1.2

Connect the five wires coming

from the AVC module to 12 position
connector on the back of the MODEL
4/6. The connector positions are from
left to right and the description is on the
decal on the back of the MODEL 4/6.

AVC WIRE

POS

DESCRIPTION

Optional 1

Shield

(Optional)

Blue 2

Gnd

White 3

setpoint

Yellow 4

input

Gray 5

P>SP

Brown 6

P<SP

Green 7

+18

vdc

(unreg.)

8

not

used

Optional

9

P>SP (30 mA)

Optional

10

P<SP (30 mA)

Optional 11

output

Gnd

Optional 12

0-1

vdc

output

NOTE:

Be sure connectors are firmly

pushed in to the back of the MODEL 4/6

3.2 CONFIGURATION

If you ordered an AVC with a DV-4
tube the configuration should be
“torr and d-4C”.

If you ordered an AVC with a DV-6
tube the configuration should be
“torr and d-6C”.

To check your current configuration

:

3.2.1

Plug the AVC module into either

a DV-4 or DV-6 tube. The tube should
be at atmospheric pressure.

3.2.2

Remove the front bezel and the

front panel. Locate the black push
button in the lower right hand corner.

3.2.3

Turn the MODEL 4/6 ON (or

plug into 115vac). Since the tube is at
atmospheric pressure, the display should
read “_or_” for over range. (It may read
E__0 or some pressure if the MODEL
4/6 is set for the wrong tube.)

3.2.4

Press and release the push button.

The display will read “torr” or “hPA”.
One hPa equals one millibar.

3.2.5

Press and release the push button

again within 10 sec. And the display will
read “d-4C” or “d-6C”.

3.2.6

Press and release the push button

again within 10 sec. The display will
flash the set point pressure. If you know
what your set point pressure should be,
you can adjust to that pressure using the
S.P. potentiometer on top of the AVC
module. The display will remain in the
set point mode until you press and
release the push button again.

3.2.7

Press and release the push button

again and you will return to the pressure
mode and the display will read “_or_”.

If the settings were all correct, the
MODEL 4/6 is ready to measure

«
...
3
4
5
6
7
...
»

Содержание HASTINGS 4/6











Отзывы:

Нет отзывов