Page | 18
Chapter 4: Maintenance
Before Use
1. Prior to assembly of components, ensure that all connector contacts are clean, dry and free of dirt
and/or corrosion.
2. Inspect all BV3200 hardware for excessive corrosion. Replace as needed.
3. Inspect all cables and connectors for abrasion, cuts or cracks. Repair or replace as needed.
After Use
1. After use rinse all BV3200 components with a solution of mild soap and fresh water. At this time,
inspect all components for corrosion, wear or damage. Replace any piece of hardware showing
corrosion or damage.
