Teledyne 2000A-EU, Руководство по эксплуатации, Страница: 45 / 86

Thermal Conductivity Analyzer Operation 4
4-7
Teledyne Analytical Instruments
CONTRAST AUTO—CAL
PWD LOGOUT MORE
Use the < > arrow keys to scroll the blinking over to
PWD
, and press
Enter to select the password function. Either the default
TAI
password or
AAA
place holders for an existing password will appear on screen depending on
whether or not a password has been previously installed.
Enter password:
T A I
or
Enter password:
A A A
The screen prompts you to enter the current password. If you are not using
password protection, press Enter to accept TAI as the default password. If a
password has been previously installed, enter the password using the < > arrow
keys to scroll back and forth between letters, and the
∆∆∆∆∆∇
arrow keys to change
the letters to the proper password. Press Enter to enter the password.
In a few seconds, you will be given the opportunity to change this pass-
word or keep it and go on.
Change Password?
<ENT>=Yes <ESC>=No
Press
Escape
to move on, or proceed as in Changing the Password,
below.
4.3.3.2 Installing or Changing the Password
If you want to install a password, or change an existing password, proceed
as above in Entering the Password. When you are given the opportunity to
change the password:
Change Password?
<ENT>=Yes <ESC>=No
Press
Enter
to change the password (either the default
TAI
or the previ-
ously assigned password), or press
Escape
to keep the existing password and
move on.
If you chose
Enter
to change the password, the password assignment
screen appears.
Select new password
T A I
Contrast Function is DISABLED
(Refer to Section 1.6)