Teledyne 2000A-EU Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 86

Teledyne 2000A-EU Скачать руководство пользователя страница 10

1-2

1 Introduction

Model 2000A-EU

Teledyne Analytical Instruments

1.2

Typical Applications

A few typical applications of the Model 2000 are:

•

Power Generation

•

Air liquefaction

•

Chemical reaction monitoring

•

Steel manufacturing and heat treating

•

Petrochemical process control

•

Quality assurance

•

Refrigeration and storage

•

Gas proportioning control.

1.3

Main Features of the Analyzer

The main features of the Model 2000 Thermal Conductivity Analyzer

include:

•

Three independent, user definable, analysis ranges allow up to
three different gas applications with one concentration range
each, or up to three concentration ranges for a single gas appli-
cation, or any combination.

•

Special recalibration range for multiple applications. Recalibrat-
ing one, recalibrates all.

•

Automatic, independent linearization for each range.

•

Auto Ranging allows analyzer to automatically select the proper
preset range for a given single application. Manual override
allows the user to lock onto a specific range of interest.

•

RS-232 serial digital port for use with a computer or other
digital communications device.

•

Two adjustable concentration alarms and a system failure alarm.

•

Extensive self-diagnostic testing, at startup and on demand.

•

A 2-line alphanumeric display screen, driven by microprocessor
electronics, that continuously prompts and informs the operator.

•

High resolution, accurate indication of target or impurity gas
concentration from large, bright, meter readout. (0-9999 ppm
through 0-100 % depending on types of gas involved.)

•

Standard, proven sensor cell design.

•

Wide range of custom applications, ranges, and linearization.

«
...
8
9
10
11
12
...
»

Содержание 2000A-EU























































































Отзывы:

Нет отзывов