Teledyne 10 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 88

Teledyne 10 Скачать руководство пользователя страница 43

BioOptix™ 10

Section 3 Operation

3-7

•

Collect Effluent

– Select the desired action for effluent

fluid as it comes off the column. If

Yes

is selected, enter

the desired fraction size.

Note

The Elute tab is a “Gradient” block type. See Appendix A.

3.5.5 Flush Settings

This block pumps fluid to flush remaining sample from the
column and system tubing. This step can prepare the column for
the next purification run, storage, or disposal.

The Flush tab is a fluid block type, therefore the settings dis-
played on this tab are the same as the Equilibrate and Wash
tabs. Refer to section 3.5.1 for a discussion on the settings for this
tab.

Figure 3-6

Flush tab settings

3.5.6 Saving the Method File

To be used in an experiment file, the method file must be saved.
Save the method by selecting the File>Save menu command. Use
a descriptive file name so that it can be located later.

3.6 Experiments

An experiment file can be created by:

• selecting the

File>New>Experiment

menu command,

• pressing the

Ctrl+E

keyboard buttons,

• or by clicking the

E

toolbar button.

Before building and displaying the experiment file, you must
select a method file that will be used for all ten channels. In the

Select a Method for Experiment

dialog box, locate and highlight

the method file, then click the

Open

button.

An experiment file displays operating parameters in a table.
Many of the columns in the table are determined by the template
file used to create the method file. (Refer to Appendix A for more
details on the template file.) Default values will be assigned to
the table cells from the method file you’ve chosen.

«
...
41
42
43
44
45
...
»

Содержание 10

























































































Отзывы:

Нет отзывов