WorkHorse Rio Grande ADCP User's Guide
page 12
RD Instruments
b. Click the
Start
button, and then click
Run
.
c. Type
<drive>:launch
. For example, if your CD-ROM drive is drive D,
type
d:launch
.
d. Follow the browser instructions on your screen
6.3 Utility
Software
The following DOS programs (on the RDI Tools CD) have been provided to
supplement features not yet implemented into the Windows environment.
RDI will incorporate these features in future releases. These programs will
be installed to the directory C:\Program Files\Rd Instruments\Utilities when
you run the RDI Tools installation program.
Table 4:
WorkHorse DOS Utility Software
Program Name
Description
BBLIST
Executable program that can be operated through the Windows environment.
This program will display binary data in tabular format as well as convert the
data into an ASCII file.
BBBATCH
Automatically converts a named binary data set to a named ASCII data set
using an existing format file. Use this program to convert binary files unat-
tended through a DOS batch file.
BBCONV
Executable program that cannot be operated through the Windows environ-
ment. Removes user selected data from binary files and stores the information
into ASCII comma delimited format. See BCONV.DOC for decoder file format.
BBMERGE
Executable program that cannot be operated through the Windows environ-
ment. BBMERGE merges ASCII comma delimited format data described by a
decoder (.DEC) file into the raw BroadBand ADCP data file "infilename", result-
ing in an output ADCP data file called "outfilename". See BCONV.DOC for
decoder file format.
BBSUB
Executable program that cannot be operated through the Windows environ-
ment. BBSUB starts copying ensembles from 'infilename' to 'outfilename' start-
ing with the user specified “Start” and “End” ensemble number. This is intended
to allow users to subsection binary data files.
SS
Executable program that can be operated through the Windows environment.
SS allows you to quickly calculate the speed of sound in the water.
SURFACE
Executable program that cannot be operated through the Windows environ-
ment. Surface estimates the range from the ADCP to the water surface or bot-
tom from the echo intensity data. This program does not change the original
data. It creates a text file with the estimated ranges. Intended for customers to
estimate where to cut off their data.
CHECKDAT
Executable program that cannot be operated through the Windows environ-
ment. CHECKAT will scan a data file for missing ensembles, ensemble number
out of order, bad checksum ensembles and ensembles with bit errors. If the
DOS redirect command (> symbol) is used then the output will be placed into a
file.
C++ Code Library
The C++ Code library has been provided to help you in the creation of your own
programs. These files are provided as is and in general are not supported. Use
at your own discretion. The files are located in the directory: C:\Program
Files\Rd Instruments\Utilities\C_Code.
Содержание WorkHorse Rio Grande ADCP
Страница 2: ......
