Summit Z58 Exerciser/Analyzer System
Introduction
The Summit Z58 is Teledyne LeCroy’s fifth generation protocol exerciser (traffic generator), providing support for the PCI
Express 5.0 specification with up to x8 lanes and up to 32.0 GT/s data rates. The Summit Z58 can emulate either a PCI
Express Root Complex or Device Endpoint, allowing new designs to be tested against known standards.
In addition to the exerciser features, the Summit Z58 can optionally be configured to include analyzer capabilities that
would make it a self-contained solution for PCI Express development. Use this document for quick installation and setup.
If you experience problems or need more information on latest software version and for host machine requirements, see
the
Readme
file or the Summit Z58 User Manual on the PCIe Protocol Analysis Software installation or at the Teledyne
LeCroy website
(
teledynelecroy.com/sw/pciexpress)
.
Components
The package includes the following components:
•
Summit Z58 Main board
•
Summit Z5 Controller board
•
12 inch Controller Cable
•
Two (2) TX SSC CLK Cables
•
Power Adapter (Output: 24 VDC, 9.2 Amps, 220 Watts)
•
USB Type-C cable
•
Ethernet cable
•
Quick Start Guide (this document)
Summit Z58
™
PCI Express
®
5.0 x8
Protocol Exerciser / Analyzer
Quick Start Guide
1
2
Unpacking the Exerciser
Inspect the received shipping container for any damage. Unpack the container and account for each of the system components listed on the
accompanying packing list. Visually inspect each component for absence of damage. In the event of damage, notify the shipper and Teledyne
LeCroy. Retain all shipping materials for shipper’s inspection.
Attention: Use precautions for handling electrostatic-sensitive devices when working with the Summit Z58
3
Please see the
Summit Z5 User Manual
for component specifications and further details.
