Interconnection Overview with Summit T54 Analyzer
PCIe Card Under Test
12V DC
from
adapter
supplied
Summit T54 Analyzer
(with Gen5 PHY)
Configuration
switches and clock
inputs
(see table below):
SW2
PCIe Slot from Host System Under Test
Depending on the
Interposer, the edge
connector can be
x16, x8, x4 or x1
DUT Power LED
Status Switch: SW1
Active Width Control
Pushbutton: SW3
Signal
Detect
LEDs
A
C
B
D
Gen5 Straight Cable x4
(PE027UCA-X)
Link Width
Status LEDs
Upstream Clock In
Downstream Clock In
Connection to
Retimer Board*
Connection from
Retimer Board*
* For information about use of Retimer
Board see
Gen5 Slot Retimer
User Manual and Quick Start Guide
Connection diagram for single port up to x4 using a Gen5 x8 Interposer
