background image

  
PCI Express

®

 5.0 Slot Interposer

User Manual and

 Quick Start Guide

    

  Components

The interposer package includes the following components: 

PCI Express 5.0 Slot Interposer 

Half height bracket

Four spare screws for bracket attachment

DC Power Adapter (12 volts)

User Manual and Quick Start Guide (this document)

Inspect the received shipping container for any damage. Unpack the container and account for each of the system 
components listed on the accompanying packing list. Visually inspect each component for absence of damage. 
In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.

     

Introduction

Use this document for quick installation and setup.
The Teledyne LeCroy PCI Express 5.0 Slot Interposer plugs in to a PCIe

®

 CEM Connector and allows you to probe PCI 

Express traffic between a host and a PCIe expansion card. The interposer assures reliable data transmission while providing 
100% capture of all data traffic flowing through the PCIe slot interface. Connecting the interposer to a Teledyne LeCroy 
analyzer allows decoding and display of data flowing in both directions and across all lanes, and will display data traffic using 
the industry-standard CATC Trace™ data display, along with a wide range of traffic and error reports. The Gen5 Interposer 
is for use with a Summit T5 Gen5 capable analyzer. The interposer uses Teledyne LeCroy’s T.A.P.5 technology to ensure 
complete data capture at Gen5 rates with minimal signal perturbation.
The Gen5 Interposer supports data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s, 16.0 GT/s or 32.0 GT/s and depending on the 
version purchased link widths up to x16. For all the versions of the interposer, the PCIe connector on the card will support 
PCIe expansion cards up to x16. Versions of the interposer with lower link width have a reduced PCIe edge connector at the 
bottom. A x1, x4, x8 or x16 DUT card can be inserted on the top connector and the connection will automatically negotiate 
to the lesser link width. The image below shows a Gen5 x8 Interposer, other versions include: x1, x4 and x16.

PCI Express 5.0 Slot Interposer

1

2

Содержание Everywhereyoulook PCI Express 5.0 Slot Interposer









Отзывы: