Teledyne Analytical Instruments 3110XL, Руководство по эксплуатации

Страница: 34 / 44

Operation Model 3110XL
Teledyne Analytical Instruments
24
3.2.11 LOG TRANSMIT Screen
Data can be downloaded to a computer using the 9-pin D-
subminiature port and cable attached to a PC. The D-sub port accepts a
standard data cable with a DB-9 connector. The computer must be able
to accept data from a source with the following characteristics:
9600 baud
8 bit data
no parity
1 stop bit
no flow control
Refer to your computer manual for details on how to setup the RS-
232 communications port on your computer.
To download a data log:
1. Use the UP/DOWN keys to navigate to the
LOG TRANSMIT
screen. Then press ENTER to enter the setup screen.
2. Press ENTER again to transmit the current data log.
Note: The data set will be transmitted each time you press the
ENTER key. Use the ESC key to exit the LOG TRANSMIT
menu.
3. Press ESC to exit out of the
LOG TRANSMIT
screen and go
to the home screen.
Note: The Date Log does not need to be stopped in order to
transmit the date.