8
www.teledex.com
M SERIES ANALOG CORDED USER GUIDE
of any combination of devices subject only to
the requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not
exceed 5 .
REN: Z
For warranty and service in Canada, please
contact:
Williams Telecommunications
5610 Kennedy Road
Mississauga, Ontario, L4Z2A9
Canada
Phone: 905-712-4242
Fax: 905-712-1754
Requirements of Part 15—
FCC Rules
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules . These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation . This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications . However, there is no
guarantee that interference will not occur in a
particular installation . If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
1 . Move the telephone away from the
receiver .
2 . Consult the dealer or an experienced
radio/TV technician for help .
Any changes made by the user not approved by
the manufacturer can void the user’s authority to
operate the telephone .
Requirements of Part 68—
FCC Rules
This equipment complies with Part 68 of the FCC
Rules and the requirements adopted by ACTA .
On the bottom of this telephone is a label that
contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX . If
requested, this number must be provided to
the telephone company . The USOC Jack for this
equipment is RJ11C .
A plug and jack used to connect this equipment
to the premises wiring and telephone network
must comply with the applicable FCC Part 68
rules and requirements adopted by ACTA . A
compliant telephone cord and modular plug are
provided with this telephone . It is designed to be
connected to a compatible modular jack that is
also compliant . See installation instructions for
details .
The Ringer Equivalence Number (REN) is used
to determine the number of devices that may be
connected to a telephone line . Excessive RENs
on a telephone line may result in the devices
not ringing in response to an incoming call . In
most but not all areas, the sum of RENs should
not exceed five (5 .0) . To be certain of the number
of devices that may be connected to a line, as
determined by the total RENs, contact the local
telephone company . For products approved after
July 23, 2001, the REN for this product is a part
of the product identifier that has the format
US:AAAEQ##TXXXX . The digits represented by
## are the REN without a decimal point (e .g ., 03
is a REN of 0 .3) . For earlier products, the REN is
separately shown on the label .
If this telephone causes harm to the telephone
network, the telephone company will notify you
in advance that temporary discontinuance of
service may be required . But if advance notice is
not practical, the telephone company will notify
